WriteIMEI Tool is a small tool that allows you to write or flash IMEI on only Spreadtrum Chipset devices which includes Smart phone, FeaturePhone and Tablets.

Here, on this page We have shared the all latest version of the tool along with the previous version of WriteIMEI Tool.

Features of  WriteIMEI Tool

Flash Single IMEI
It allows users to flash the IMEI on only Spreadtrum Chipset devices which includes FeaturePhone, Smartphone and Tablets.

Flash Multiple IMEI
It allows users to flash multiple IMEI up to 4 on only Spreadtrum Chipset devices which includes FeaturePhone, Smartphone and Tablets. Simply add the IMEI in the input area and select the mode
and click on write to begin.

Supports Normal Mode/Calibration Mode
It allows you to write IMEI through two mode - Normal Mode and Calibration mode. In the normal mode your device should be on before connecting the device to the computer and Calibration Mode you do not have to press the power key, if you are using the USB cable.

Flash IMEI of your Choice
You can also flash IMEI of your choice on your device because flashin IMEI different than the original is illegal and may cause trouble for you so beware.

Download WriteIMEI Tool

R1.5.3001: WriteIMEI_R1.5.3001.00

R1.5.6001:   WriteIMEI_R1.1520.00

R1.5.9001:   WriteIMEI_R1.1528.00

R1.6.4001:   WriteIMEI_R1.1532.00

R2.1.0001:   WriteIMEI_R1.1536.00

R3.0.0001:   WriteIMEI_R1.1544.00

R4.0.0001:   WriteIMEI_R1.1552.00

R5.0.0001:   WriteIMEI_R1.1604.00

R6.0.0001:   WriteIMEI_R1.1620.00

R17.0.0001: WriteIMEI_R1.1632.00

Keep Mind:

[*] How to use: If you want to learn how to write IMEI on MediaTek devices see How to use SN Write Tool.

[*] Supports only MediaTek chipset: SN Write Tool allows you to flash or write IMEI on MediaTek chipset device only.

[*] Caution: Flashing IMEI other than the original of your device is illegal and may cause serious troubles to you, so beware.

[*] What’s your Device IMEI Number? You can know your device IMEI number by dialing *#06# or from the back panel of your device (remove your device battery and you will find the IMEI code written on the back panel).

[*] Credits: SN Write Tool is created and distributed by MediaTek Inc. So, full credits go to them for the tool. MediaTek also provide SP Flash Tool which allows you to flash firmware on MediaTek (MTK) devices.

These are instructions to Flash or Write IEMI using WriteIMEI Tool on any SpreadTrum devices in the Windows Computer.

Requirements: Your Smartphone should be based on SpreadTrum and have at least 40-50 percent charge of battery  to perform the flashing process.

Flash or Write IEMI using WriteIEMI Tool

Step 1: Download  and install Spreadtrum Diver on your windows computer.
Step 2: Download and extract WriteIEMI Tool on your computer. After extracting you will be able to see the following files :-

Step 3: Now, Open WriteIEMI.exe file.


Step 4: Once, WriteIEMI Tool is launched, you will be able to see the the following window :


Step 5: Now, Click on Mode Select tab and select Normal Mode:

 Step 6: After , Click on the Select tab :


Step 7: Now, Click on the Set tab and select the list of IMEI to according available IEMI on your device.

Step 8: Now, under IMEI 1 selection option available two- Manual Input and Default IEMI to select Manual Input and Click on the Save tab:
.

Step 9: Now connect your device to the windows computer.

Step 10: Than click on the Write tab to begin  WritingIMEI or Flashing process:


Step 11: Now, Writing IMEI is completed to see the green pass message on the WriteIMEI Tool.

Step 12: Now, restarted your device to check IMEI code by dail *#06# and verify the IMEI writing process is correctly or not.

          Keep Mind:

[*] Support: WriteIMEI Tool you can flash up to 4 IMEI at a time to available your device SIM .
[*] Caution: Flashing Auto Generated IMEI is illegal and may cause serious trouble to your device so be ware , what are you doing. 
[*]  My blog does not force or guide you to change your Original IMEI. This blog only guides you, how this is done?, so take no responsibility what you did or will do with the IMEI codes. 
[*] Backup Please: Take a backup of your important data before using the Smart Phone on Flashings IMEI because during the flashing process your personal data will be removed or lost permanently.
[*] Credits: WriteIMEI Tool  is created and made available by Spreadtrum INC. So full credit goes to them for the tool. without this tool the above tutorial was not possible.

These are instructions to Flash or Write IEMI using Read&Write Tool on any SpreadTrum, MTK, Qualcomm devices.

Requirements: Your Smartphone should be based on SpreadTrum, MTK, Qualcomm chip set and have at least 40-50 percent charge of battery  to perform the flashing process.

Flash or Write IEMI using Read&Write Tool

Step 1: Download  and extract Read&Write Tool on your computer. After extracting you will be able to see the following files :-

Step 2: Now, Open WRTools.exe file.


Step 3: Once, Read&Write Tool is launched, you will be able to see the the following window :


Step 4: Now, Open the File tap and Click on Config:



Step 5: Once, Setting Window is launched, you will be able to see the the following screen:


Step 6: Now, under PlateformConfig  select  Chipset Device that  given the perfect option according your device as if Media Tek devic then choose MTK, or Qualcomn device then choose QQCOMM or Spredtrum device then choose Spreadrum .

Step 7: Now under ComPort select USB.


Step 8: Now, under DataFileConfig select BP and AP file from your device stock firmware file. Both file comes with the mediatek stock firmware.


Step 9: Now click OK button. if your smart device have dual SIM to select dual IMEI1 and IMEI2 to see the following screen:

Step 10: Once, Write the IMEI in IMEI1 and IMEI2 box according to available Your device IMEI. After click on Write tab to begin the Writing or Flashing process:


Step 11: Now, Writing IMEI is completed to see the green pass message.

          Keep Mind:

[*] Support: Read & Write Tool you can flash IMEI on Qualcomm, MTK, SpreadTrum chipset device only.
[*] Alternative Tools: If you have MediaTek Device then flashing IMEI using SN Write Tool, if you have Spreadtrum Device then flashing IMEI using WriteIMEI Tool.
[*] Backup Please: Take a backup of your important data before using the Smart Phone on Flashings IMEI because during the flashing process your personal data will be removed or lost permanently.
[*] Credits: Read & Write Tool  is created by WangWenJaing So full credit goes to him for the tool. without this tool the above tutorial was not possible.

These are instructions to change or write IMEI on MediaTek device using SN Write Tool on Windows Computer.

 

Step 6: Now, click on System Config Button.


Step 7: Once System Config is launched, Select IMEI, BT Address and Wifi Address in Write Option.


Step 8: If you have Dual SIM device, then select Dual IMEI Option. This option is not valid single SIM device .


Step 9: Now, Under the Database File Option, Add the Tab Button “MD1_DB” and “AP_DB”, These both files come with the firmware of your device.


Step 10: Now, Click on Save Tab Button.


Step 11: After then See, the SN Write Tool home screen Click on Start Tab Button.


Step 12: Now, Under the Scan Data write the IMEI_1 and IMEI_2, Bluetooth Address, Wifi Address and click on OK button.


Step 13: Now, you can connect the phone through USB after switch off the phone and plug out the battery, and click OK tab button now display Start searching pre loader com port and handshake, it will appear situation as follows:


Step 14: Once, IMEI writing is finished you will be able to see the Green Pass Message.

Keep Mind :
[*] With the help of  SN Write tool, you can flash IMEI on MediaTek devices.
[*] Caution: Flashing IMEI other than the original is illegal, and may cause serious troubles to you. So, be aware what you are doing.
[*] This website doesn't force you to change the device IMEI. We only, guides you how it is done, so takes no any responsibility what you did or will do with the IMEI codes on your device.
[*] Credits: SN Write Tool is created by MediaTek Inc. SO, full credits goes to them for the tool.

SN Write Tool is a small tool that allows you to write or flash IMEI on MediaTek devices.
Here, on this page I have shared the all latest version as well as the old version of SN Write Tool.

SN Write Tool -Features

Flash Single or Multiple IMEI
It allows users to flash single or multiple IMEI up to 4 on the MediaTek device.

Various Write Options
It allows users to flash various options apart of flashing the IMEI only. It supports Barcode, BT Address, Wi-Fi Address, Wifi EPPCopy, Mac Address, DRMkey MCID.

IMEI Lock
It allows users to flash or remove IMEI lock option in the Mediatek Devices.

Multiple Target Support
It supports Multiple MediaTek Devices like Feature Phone, Smartphone, SP Dual Modem, Tablet (Wi-Fi only), Rndis Dongle.

Require Database File
To use SP Write Tool you need to have the database file of the same device on which you are going to flash the IMEI. Database files come along the stock firmware of every device.

Download SN Write Tool

SN_Write_Tool_v1.1516.00

SN_Write_Tool_v1.1520.00

SN_Write_Tool_v1.1528.00

SN_Write_Tool_v1.1532.00

SN_Write_Tool_v1.1536.00

SN_Write_Tool_v1.1544.00

SN_Write_Tool_v1.1552.00

SN_Write_Tool_v1.1604.00

SN_Write_Tool_v1.1620.00

SN_Write_Tool_v1.1632.00

SN_Write_Tool_v1.1636.00

SN_Write_Tool_v1.1640.00

SN_Write_Tool_v1.1648.00

SN_Write_Tool_v1.1712.00

SN_Write_Tool_v1.1716.00

SN_Write_Tool_v1.1728.00

Keep Mind:

[*] How to use: If you want to learn how to write IMEI on MediaTek devices see How to use SN Write Tool.

[*] Supports only MediaTek chipset: SN Write Tool allows you to flash or write IMEI on MediaTek chipset device only.

[*] Caution: Flashing IMEI other than the original of your device is illegal and may cause serious troubles to you, so beware.

[*] What’s your Device IMEI Number? You can know your device IMEI number by dialing *#06# or from the back panel of your device (remove your device battery and you will find the IMEI code written on the back panel).

[*] Credits: SN Write Tool is created and distributed by MediaTek Inc. So, full credits go to them for the tool. MediaTek also provide SP Flash Tool which allows you to flash firmware on MediaTek (MTK) devices.

Smart Phone Flash Tool (SP Flash Tool) allows you to Flash any Stock Rom or any Custom on the Smartphone. Here, we are going to talk about the Smart Phone Flash Tool and its features.

Smart Phone Flash Tool (SP Flash Tool) Features

Flash Stock Rom:
It allows you to flash scatter based firmware on android device (MTK based). It also allows you to downgrade or upgrade your device firmware in few clicks.

Flash Recovery:
It allows you to flash custom recovery to your MTK based device. Simply, add the scatter file in the SP Flash tool and locate the recovery.img image and flash it.

Memory Test:
It allows users to check and verify the RAM on external memory and the NAND Flash on the device.

Parameter Setting:
It allows users to read and write the parameter on device devices. For Example, users can easily read and write functions data for One time programming (OTP) area.

Format Device / Hard Reset:
It allows users to format Android Smartphone running on the MediaTek Chipset. Simply load the Scatter file and connect your smartphone to the computer and press on Format button.

Download Smart Phone Flash Tool for Windows

 

SP Flash Tool v5.1620


SP Flash Tool v5.1624


SP Flash Tool v5.1628


SP Flash Tool v5.1632


SP Flash Tool v5.1636


SP Flash Tool v5.1640


SP Flash Tool v5.1644


SP Flash Tool v5.1648


SP Flash Tool v5.1708


SP Flash Tool v5.1712


SP Flash Tool v5.1716


SP Flash Tool v5.1720


SP Flash Tool v5.1724


SP Flash Tool v5.1728


SP Flash Tool v5.1736


SP Flash Tool v5.1744


SP Flash Tool v5.1752

These are instructions to Flashing any Stock Rom or Custom Rom using Smart Phone Flash Tool (Sp flash tool) on Windows or MC computer.

Requirements: Your Smartphone should have at least 30-40 percent charge of battery  to perform the flashing process and UBS Data Cable.

Flash Stock Rom using Smart Phone Flash Tool (SP Flash Tool)

Step 1: Download Android USB Driver and install on your computer. In case USB Driver is already installed on your Computer then skip this step.

Step 2: Power Off your Smartphone and remove the battery if it is removable.


Step 3: Download the Phone Model Stock Rom or Custom Rom that you want to Flash on your Smartphone and extract Download Win-zip or Win-rar File on your Computer.


Step 4: Download and Extract Flash Tool on Your Computer. After then you will be able to see the following files:

Step 5: Now Open Flash_tool.exe files in Step#4.


Step 6: Once Flash Tool is launched, click on the Download Tab.


Step 7: At the Download Tab, now click on the scatter-loading button.


Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock Rom folder).


Step 9: Go to click on the Download Button to begin the Flashing Process.

Step 10: Now, Connect your Smartphone to the PC using USB Cable without battery if it is removable. After connecting the device to the PC then Press Volume Down or Volume Up key, so your PC easily detect your Smartphone.


Step 11: Flashing is completed, disconnect your Smart phone from the Computer.

Step 12: Now your Smartphone is successfully running the Stock Rom you have Downloaded.


Read me:

[*]The above tutorial only works with the Stock firmware or Custom Rom which comes with the Scatter file in it (basically mediatek devices).

[*] Backup Please: Take a backup of your important data before using the Smart Phone Flash Tool as because during the flashing process your personal data will be removed or lost permanently. 
[*] Credits: SP Flash Tool is created by Mediatek Inc. So full credits go to them for sharing the tool for free.